Абонентские устройства xDSL, VOIP

Features

• Complies with various ADSL standards and provides up to 24 Mbps downstream rate per ADSL2+ (G.992.5)
• Built-in four-port 10/100Base-T Ethernet switch for PC or LAN connection, which supports automatic speed sensing as well as MDI/MDI-X crossover detection and correction
• RFC 2684 /1483 LLC/SNAP and VC-Mux encapsulation for bridged and routed protocols, which supports bridging, IPoA, PPPoA and PPPoE
• Interchangeable between bridge and router modes
• ATM PVC to LAN-group mapping as well as IP QoS support per connection can perfectly meet the requirements for multiple services and triple-play applications
• Allows LAN users to simultaneously access Internet through Network Address Translation (NAT, IP sharing) with protection from SPI firewall
• DHCP client, server or relay is supported for easy IP address management
• Configuration and management by Web-browser locally through Ethernet interface or remotely through ADSL link
• Support SNMP for remote management from central office side
• Firmware upgradeable through HTTP or TFTP

X7821r and X7821r+ are ADSL/ADSL2+ series of customer premise equipments that provide high-speed asymmetrical data transmission on a single twisted copper pair. The DSL line interface supports various ADSL standards, up to ADSL2+ with X7821r+. At the DTE side these CPEs provide one 10/100 Ethernet interface for easy connection to user's PC or LAN environment. X7821r and X7821r+ deliver broadband Internet access for enterprises, telecommuters, home, and remote office workers with high-speed data transfer requirements.

Features

• Compliant with ITU-T G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3 (G.dmt.bis / ADSL2) and ANSI T1.413 issue 2
• X7821r+ is additionally compliant with ITU-T G.992.5 (ADSL2+) and provides up to 24 Mbps downstream rate
• Compatible and interoperable with major Central Office side ADSL DSLAM or Multi-service Access System
• One 10/100 Base-TX Ethernet port with Auto MDI/MDI-X for PC / LAN connection
• RFC2684 / 1483 to bridge or route traffic over ATM over ADSL
• Support Networking protocols such as PPP, IP routing, NAPT, DHCP server / relay / client
• Can work either in Bridge or Router mode
• Support local and remote configuration and management through Web, Telnet or SNMP
• Simple firmware upgrade via TFTP or HTTP

The X7822r and X7822r+ are ADSL/ADSL2+ series of customer premise equipments that provide high-speed asymmetrical data transmission on a single twisted copper pair. The DSL line interface supports various ADSL standards, up to ADSL2+ with X7822r+. At the DTE side these CPEs provide one 4-port 10/100 Ethernet switch for easy connection to user's PC or LAN environment. Embedded firewall protects the LAN clients from malicious attacks or intrusions. Featuring per-port PVC function, quality of service (QoS) can be easily achieved for real-time multimedia services. X7822r and X7822r+ deliver broadband Internet access for enterprises, telecommuters, home, and remote office workers with high-speed data transfer requirements.

Features

• Compliant with ITU-T G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3 (G.dmt.bis / ADSL2) and ANSI T1.413 issue 2
  
• X7822r+ is additionally compliant with ITU-T G.992.5 (ADSL2+) and provides up to 24 Mbps downstream rate
  
• Compatible and interoperable with major Central Office side ADSL DSLAM or Multi-service Access System
  
• Four-port 10/100 Base-TX Ethernet switch for PC / LAN connection
  
• RFC2684 / 1483 to bridge or route traffic over ATM over ADSL
  
• Support Networking protocols such as PPP, IP routing, NAPT, DHCP server / relay / client
  
• Can work either in Bridge or Router mode
  
• Per-port PVC extends QoS of ATM to LAN environment
  
• Support local and remote configuration and management through Web, Telnet or SNMP
  
• Simple firmware upgrade via TFTP or HTTP

X7824r and X7824r+ are ADSL/ADSL2+ series of customer premise equipments that provide high-speed asymmetrical data transmission on a single twisted copper pair. The DSL line interface supports various ADSL standards, up to ADSL2+ with X7824r+. At the DTE side these CPEs provide one 10/100 Ethernet interface and one USB port for easy connection to user's PC or LAN environment. X7824r and X7824r+ deliver broadband Internet access for enterprises, telecommuters, home, and remote office workers with high-speed data transfer requirements.

 
Features

• Compliant with ITU-T G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3 (G.dmt.bis / ADSL2) and ANSI T1.413 issue 2
• X7824r+ is additionally compliant with ITU-T G.992.5 (ADSL2+) and provides up to 24 Mbps downstream rate
• Compatible and interoperable with major Central Office side ADSL DSLAM or Multi-service Access System
• One 10/100 Base-TX Ethernet port and one USB 1.1 device port for PC / LAN connection
• RFC2684 / 1483 to bridge or route traffic over ATM over ADSL
• Support Networking protocols such as PPP, IP routing, NAPT, DHCP server / relay / client
• Can work either in Bridge or Router mode
• Support local and remote configuration and management through Web, Telnet or SNMP
• Simple firmware upgrade via TFTP or HTTP

The X7827r and X7827r+ are ADSL/ADSL2+ series of customer premise equipments that provide high-speed asymmetrical data transmission on a single twisted copper pair. The DSL line interface supports various ADSL standards, up to ADSL2+ with X7827r+. At the DTE side these CPEs provide one 4-port 10/100 Ethernet switch and one USB port for easy connection to user's PC or LAN environment. Embedded firewall protects the LAN clients from malicious attacks or intrusions. Featuring per-port PVC function, quality of service (QoS) can be easily achieved for real-time multimedia services. X7827r and X7827r+ deliver broadband Internet access for enterprises, telecommuters, home, and remote office workers with high-speed data transfer requirements.

 
Features

• Compliant with ITU-T G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3 (G.dmt.bis / ADSL2) and ANSI T1.413 issue 2
• X7827r+ is additionally compliant with ITU-T G.992.5 (ADSL2+) and provides up to 24 Mbps downstream rate
• Compatible and interoperable with major Central Office side ADSL DSLAM or Multi-service Access System
• Four-port 10/100 Base-TX Ethernet switch and one USB 1.1 device port for PC / LAN connection
• RFC2684 / 1483 to bridge or route traffic over ATM over ADSL
• Support Networking protocols such as PPP, IP routing, NAPT, DHCP server / relay / client
• Can work either in Bridge or Router mode
• Per-port PVC extends QoS of ATM to LAN environment
• Support local and remote configuration and management through Web, Telnet or SNMP
• Simple firmware upgrade via TFTP or HTTP
  

X7922 is a highly integrated ADSL2+ home gateway that shall meet requirements for customer premise equipment today. With compliance with various DSL standards, it is designed to interoperate with DSLAMs from major vendors. This router provides four 10/100 Base-TX Ethernet interfaces for easy connection to user’s PC or LAN environment. Featuring port to PVC binding function and layer 2/3 quality of service (QoS) mechanisms to ensure real-time deliveries of multimedia services. With embedded firewall X7922 delivers secure broadband Internet access for enterprises, telecommuters, home, and remote office workers with high-speed data transmission requirement.

 
Features

• Compliant with ITU-T G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3 (G.dmt.bis/ADSL2), G.992.5 (ADSL2+) and ANSI T1.413 Issue 2; compatible and interoperable with major Central Office side ADSL DSLAM or Multi-service Access System
• ADSL2+ compliance raises downward link rate up to 24 Mbps and enhanced upstream rate up to 3 Mbps per ADSL2/2+ Annex M
• Enhanced performance of Impulse Noise Protection to ensure video streaming over copper wires
• Build-in four-port 10/100 Base-TX Ethernet switch for PC or LAN connection, supports automatic 10/100M speed-sensing and MDI/MDI-X crossover detection-and-correction
• RFC2684 /1483 bridged and routed PDU encapsulations over ATM over ADSL support bridging, MER, IPoA, PPPoA and PPPoE
• Interchangeable between Bridge or Router mode
• Supports 802.1Q tagged VLAN and 802.1p as well as standard compliant IP QoS for multiple services / triple play deployment
• Configuration and management locally or remotely via CLI/Telnet, web, SNMP or DSL Home(DSL Home, including TR-069 and TR-064, is supported in X7968m)
• Firmware upgradeable through TFTP or HTTP

X7927 is a highly integrated ADSL2+ home gateway that shall meet requirements for customer premise equipment today. With compliance with various DSL standards, it is designed to interoperate with DSLAMs from major vendors. This router provides four 10/100 Base-TX Ethernet interfaces and one USB port for easy connection to user’s PC or LAN environment. Featuring port to PVC binding function and layer 2/3 quality of service (QoS) mechanisms to ensure real-time deliveries of multimedia services. With embedded firewall X7927 delivers secure broadband Internet access for enterprises, telecommuters, home, and remote office workers with high-speed data transmission requirement.

 
Features

• Compliant with ITU-T G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3 (G.dmt.bis/ADSL2), G.992.5 (ADSL2+) and ANSI T1.413 Issue 2; compatible and interoperable with major Central Office side ADSL DSLAM or Multi-service Access System
  
• ADSL2+ compliance raises downward link rate up to 24 Mbps and enhanced upstream rate up to 3 Mbps per ADSL2/2+ Annex M
  
• Enhanced performance of Impulse Noise Protection to ensure video streaming over copper wires
  
• Build-in four-port 10/100 Base-TX Ethernet switch for PC or LAN connection, supports automatic 10/100M speed-sensing and MDI/MDI-X crossover detection-and-correction
  
• USB 1.1 compliant device port can easily plug-and-play with any modern computer
  
• RFC2684 /1483 bridged and routed PDU encapsulations over ATM over ADSL support bridging, MER, IPoA, PPPoA and PPPoE
  
• Interchangeable between Bridge or Router mode
  
• Supports 802.1Q tagged VLAN and 802.1p as well as standard compliant IP QoS for multiple services / triple play deployment
  
• Configuration and management locally or remotely via CLI/Telnet, web, SNMP or DSL Home(DSL Home, including TR-069 and TR-064, is supported in X7968m)
  
• Firmware upgradeable through TFTP or HTTP

The X7861r and X7861r+ are ADSL/ADSL2 series of customer premise equipments, and X7861r+ supports ADSL2+ in addition. With compliance with various DSL standards, they are designed to interoperate with DSLAMs from major vendors. These routers provide one 10/100 Base-TX Ethernet interfaces and 802.11b/g WLAN at the LAN side. Featuring per-port PVC function, quality of service (QoS) can be easily achieved for real-time multimedia services. With embedded firewall X7861r and X7861r+ deliver secure broadband Internet access for enterprises, telecommuters, home, and remote office workers with high-speed data transmission requirement.

 
Features

• Compliant with ITU-T G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3 (G.dmt.bis/ADSL2) and ANSI T1.413 issue 2; X7861r+ complies G.992.5 (ADSL2+) in addition
  
• High speed asymmetrical data transmission on a single twisted copper pair: 1 Mbps upstream and 8 Mbps downstream rates; ADSL2+ compliance raises downward link rate up to 24 Mbps
  
• Compatible and interoperable with major Central Office side ADSL DSLAM or Multi-service Access System
  
• RFC2684 /1483 bridged and routed PDU encapsulations over ATM over ADSL support bridging, MER, IPoA, PPPoA and PPPoE
  
• 802.11g WLAN supports up to 54Mbps transmission rate as well as Wi-Fi WPA for data security
  
• One 10/100 Base-TX Ethernet port, which supports automatic 10/100M speed-sensing for PC or LAN connection
  
• Interchangeable between Bridge and Router mode
  
• Per-port PVC extends QoS of ATM to LAN environment
  
• Configuration and management via Telnet or web, locally or remotely
  
• Firmware upgradeable through TFTP or HTTP

The X7864r and X7864r+ are ADSL/ADSL2 series of customer premise equipments, and X7864r+ supports ADSL2+ in addition. With compliance with various DSL standards, they are designed to interoperate with DSLAMs from major vendors. These routers provide one 10/100 Base-TX Ethernet interfaces, one USB device port and 802.11b/g WLAN at the LAN side. Featuring per-port PVC function, quality of service (QoS) can be easily achieved for real-time multimedia services. With embedded firewall X7864r and X7864r+ deliver secure broadband Internet access for enterprises, telecommuters, home, and remote office workers with high-speed data transmission requirement.

 
Features

• Compliant with ITU-T G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3 (G.dmt.bis/ADSL2) and ANSI T1.413 issue 2; X7864r+ complies G.992.5 (ADSL2+) in addition
  
• High speed asymmetrical data transmission on a single twisted copper pair: 1 Mbps upstream and 8 Mbps downstream rates; ADSL2+ compliance raises downward link rate up to 24 Mbps
  
• Compatible and interoperable with major Central Office side ADSL DSLAM or Multi-service Access System
  
• RFC2684 /1483 bridged and routed PDU encapsulations over ATM over ADSL support bridging, MER, IPoA, PPPoA and PPPoE
  
• 802.11g WLAN supports up to 54Mbps transmission rate as well as Wi-Fi WPA for data security
  
• One 10/100 Base-TX Ethernet port, which supports automatic 10/100M speed-sensing, and one USB 1.1 device port for PC or LAN connection
  
• Interchangeable between Bridge and Router mode
  
• Per-port PVC extends QoS of ATM to LAN environment
  
• Configuration and management via Telnet or web, locally or remotely
  
• Firmware upgradeable through TFTP or HTTP

The X7867r and X7867r+ are ADSL/ADSL2 series of customer premise equipments, and X7867r+ supports ADSL2+ in addition. With compliance with various DSL standards, they are designed to interoperate with DSLAMs from major vendors. These routers provide four 10/100 Base-TX Ethernet interfaces, one USB port and 802.11b/g WLAN at the LAN side. Featuring per-port PVC function, quality of service (QoS) can be easily achieved for real-time multimedia services. With embedded firewall X7867r and X7867r+ deliver secure broadband Internet access for enterprises, telecommuters, home, and remote office workers with high-speed data transmission requirement.

 
Features

• Compliant with ITU-T G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3 (G.dmt.bis/ADSL2) and ANSI T1.413 issue 2; X7867r+ complies with G.992.5 (ADSL2+) in addition
  
• High speed asymmetrical data transmission on a single twisted copper pair: 1 Mbps upstream and 8 Mbps downstream rates
  
• ADSL2+ compliance raises downward link rate up to 24 Mbps
  
• Compatible and interoperable with major Central Office side ADSL DSLAM or Multi-service Access System
  
• 802.11g WLAN supports up to 54Mbps transmission rate as well as Wi-Fi WPA for data security
  
• Build-in four-port 10/100 Base-TX Ethernet switch for PC or LAN connection, supports automatic 10/100M speed-sensing and MDI/MDI-X crossover detection-and-correction
  
• USB 1.1 compliant device port can easily plug-and-play with any modern computer
  
• RFC2684 /1483 bridged and routed PDU encapsulations over ATM over ADSL support bridging, MER, IPoA, PPPoA and PPPoE
  
• Interchangeable between Bridge and Router mode
  
• Per-port PVC extends QoS of ATM to LAN environment
  
• Configuration and management via Telnet or web, locally or remotely
  
• Firmware upgradeable through TFTP or HTTP

The X7868r and X7868r+ are ADSL/ADSL2 series of customer premise equipments, and X7868r+ supports ADSL2+ in addition. With compliance with various DSL standards, they are designed to interoperate with DSLAMs from major vendors. These routers provide four 10/100 Base-TX Ethernet interfaces and 802.11b/g WLAN at the LAN side. Featuring per-port PVC function, quality of service (QoS) can be easily achieved for real-time multimedia services. With embedded firewall X7868r and X7868r+ deliver secure broadband Internet access for enterprises, telecommuters, home, and remote office workers with high-speed data transmission requirement.

 
Features

• Compliant with ITU-T G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3 (G.dmt.bis/ADSL2) and ANSI T1.413 issue 2; X7868r+ complies with G.992.5 (ADSL2+) in addition
  
• High speed asymmetrical data transmission on a single twisted copper pair: 1 Mbps upstream and 8 Mbps downstream rates
  
• ADSL2+ compliance raises downward link rate up to 24 Mbps
  
• Compatible and interoperable with major Central Office side ADSL DSLAM or Multi-service Access System
  
• 802.11g WLAN supports up to 54Mbps transmission rate as well as Wi-Fi WPA for data security
  
• Build-in four-port 10/100 Base-TX Ethernet switch for PC or LAN connection, supports automatic 10/100M speed-sensing and MDI/MDI-X crossover detection-and-correction
  
• RFC2684 /1483 bridged and routed PDU encapsulations over ATM over ADSL support bridging, MER, IPoA, PPPoA and PPPoE
  
• Interchangeable between Bridge and Router mode
  
• Per-port PVC extends QoS of ATM to LAN environment
  
• Configuration and management via Telnet or web, locally or remotely
  
• Firmware upgradeable through TFTP or HTTP
  

X7967 is a highly integrated ADSL2+ home gateway that shall meet requirements for customer premise equipment today. With compliance with various DSL standards, it is designed to interoperate with DSLAMs from major vendors. This router provides four 10/100 Base-TX Ethernet interfaces, one USB port and 802.11b/g WLAN for easy connection to user’s PC or LAN environment. Featuring port to PVC binding function and layer 2/3 quality of service (QoS) mechanisms to ensure real-time deliveries of multimedia services. With embedded firewall X7967 delivers secure broadband Internet access for enterprises, telecommuters, home, and remote office workers with high-speed data transmission requirement.

 
Features

• Compliant with ITU-T G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3 (G.dmt.bis/ADSL2), G.992.5 (ADSL2+) and ANSI T1.413 Issue 2; compatible and interoperable with major Central Office side ADSL DSLAM or Multi-service Access System
  
• ADSL2+ compliance raises downward link rate up to 24 Mbps and enhanced upstream rate up to 3 Mbps per ADSL2/2+ Annex M
  
• Enhanced performance of Impulse Noise Protection to ensure video streaming over copper wires
  
• 802.11g WLAN supports up to 54Mbps transmission rate as well as Wi-Fi WEP/WPA/WPA2 for data security
  
• Build-in four-port 10/100 Base-TX Ethernet switch for PC or LAN connection, supports automatic 10/100M speed-sensing and MDI/MDI-X crossover detection-and-correction
  
• USB 1.1 compliant device port can easily plug-and-play with any modern computer
  
• RFC2684 /1483 bridged and routed PDU encapsulations over ATM over ADSL support bridging, MER, IPoA, PPPoA and PPPoE
  
• Interchangeable between Bridge or Router mode
  
• Supports 802.1Q tagged VLAN and 802.1p as well as standard compliant IP QoS for multiple services / triple play deployment
  
• Configuration and management locally or remotely via CLI/Telnet, web, SNMP or DSL Home(DSL Home, including TR-069 and TR-064, is supported in X7968m)
  
• Firmware upgradeable through TFTP or HTTP
  

X7968 is a highly integrated ADSL2+ home gateway that shall meet requirements for customer premise equipment today. With compliance with various DSL standards, it is designed to interoperate with DSLAMs from major vendors. This router provides four 10/100 Base-TX Ethernet interfaces and 802.11b/g WLAN for easy connection to user’s PC or LAN environment. Featuring port to PVC binding function and layer 2/3 quality of service (QoS) mechanisms to ensure real-time deliveries of multimedia services. With embedded firewall X7968 delivers secure broadband Internet access for enterprises, telecommuters, home, and remote office workers with high-speed data transmission requirement.

 
Features

• Compliant with ITU-T G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3 (G.dmt.bis/ADSL2), G.992.5 (ADSL2+) and ANSI T1.413 Issue 2; compatible and interoperable with major Central Office side ADSL DSLAM or Multi-service Access System
  
• ADSL2+ compliance raises downward link rate up to 24 Mbps and enhanced upstream rate up to 3 Mbps per ADSL2/2+ Annex M
  
• Enhanced performance of Impulse Noise Protection to ensure video streaming over copper wires
  
• 802.11g WLAN supports up to 54Mbps transmission rate as well as Wi-Fi WEP/WPA/WPA2 for data security
  
• Build-in four-port 10/100 Base-TX Ethernet switch for PC or LAN connection, supports automatic 10/100M speed-sensing and MDI/MDI-X crossover detection-and-correction
  
• RFC2684 /1483 bridged and routed PDU encapsulations over ATM over ADSL support bridging, MER, IPoA, PPPoA and PPPoE
  
• Interchangeable between Bridge or Router mode
  
• Supports 802.1Q tagged VLAN and 802.1p as well as standard compliant IP QoS for multiple services / triple play deployment
  
• Configuration and management locally or remotely via CLI/Telnet, web, SNMP or DSL Home(DSL Home, including TR-069 and TR-064, is supported in X7968m)
  
• Firmware upgradeable through TFTP or HTTP
  

X8821r and X8821r+ are ADSL/ADSL2+ series of customer premise equipments that provide high-speed asymmetrical data transmission on a single twisted copper pair. The DSL line interface supports various ADSL standards, up to ADSL2+ with X8821r+. At the DTE side these CPEs provide one 10/100 Ethernet interface for easy connection to user's PC or LAN environment. With built-in IP routing, NAPT and firewall, these units serve as the gateway to the Internet world. X8821r and X8821r+ deliver broadband access for enterprises, telecommuters, home, and remote office workers with high-speed data transfer requirements.

 
Features

• Compliant with ITU-T G.992.1 (G.dmt), G.992.2 (G.lite) and ANSI T1.413 issue 2
  
• X8821r+ is additionally compliant with ITU-T G.992.3 (G.dmt.bis / ADSL2), G.992.5 (ADSL2+) and provides up to 24 Mbps downstream rate
  
• Compatible and interoperable with major Central Office side ADSL DSLAM or Multi-service Access System
  
• One 10/100 Base-TX Ethernet port for PC / LAN connection
  
• RFC2684 / 1483 to bridge or route traffic over ATM over ADSL
  
• Support Networking protocols such as PPP, IP routing, NAPT, DHCP server / relay / client
  
• Can work either in Bridge or Router mode
  
• Support local and remote configuration and management through Web, Telnet or SNMP
  
• Simple firmware upgrade via TFTP or HTTP

X8821/X8824 is an ADSL/ADSL2+ series of customer premise equipments that provides high-speed asymmetrical data transmission on a single twisted copper pair. X8821m/X8824m has enhanced network management features, including DSL Forum TR-069 standard supported. The DSL line interface supports various ADSL standards, up to ADSL2+. At the DTE side, X8824 provides one 10/100 Ethernet port and one USB port for easy connection to user’s PC or LAN environment. With built-in IP routing, NAPT and firewall, X8821/X8824 serves as the home gateway to the Internet world. X8821/X8824 delivers broadband access for enterprises, telecommuters, home, and remote office workers with high-speed data transfer requirements.

 
Features

• Compliant with ITU-T G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3 (G.dmt.bis/ADSL2), G.992.5 (ADSL2+) and ANSI T1.413 Issue 2
  
• Compatible and interoperable with major Central Office side ADSL DSLAM or Multi-service Access System
  
• ADSL2+ compliance raises downward link rate up to 24 Mbps
  
• Build-in one 10/100 Base-TX Ethernet port for PC or LAN connection, supports automatic 10/100M speed-sensing and MDI/MDI-X crossover detection-and-correction
  
• RFC2684 /1483 bridged and routed PDU encapsulations over ATM over ADSL support bridging, MER, IPoA, PPPoA and PPPoE
  
• Support Networking protocols such as PPP, IP routing, NAPT, firewall, DHCP server/relay/client
  
• Interchangeable between Bridge or Router mode
  
• Configuration and management via CLI/Telnet, web, SNMP or TR-069, locally or remotely
  
• Firmware upgradeable through TFTP or HTTP

X8822/X8827 is an ADSL/ADSL2+ series of customer premise equipments that provides high-speed asymmetrical data transmission on a single twisted copper pair. X8822m/X8827m has enhanced network management features, including DSL Forum TR-069 standard supported. The DSL line interface supports various ADSL standards, up to ADSL2+. At the DTE side, X8827 provides 4-port 10/100 Ethernet switch and one USB port for easy connection to user’s PC or LAN environment. With built-in IP routing, NAPT and firewall, X8822/X8827 serves as the home gateway to the Internet world. X8822/X8827 delivers broadband access for enterprises, telecommuters, home, and remote office workers with high-speed data transfer requirements.

 
Features

• Compliant with ITU-T G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3 (G.dmt.bis/ADSL2), G.992.5 (ADSL2+) and ANSI T1.413 Issue 2.
  
• Compatible and interoperable with major Central Office side ADSL DSLAM or Multi-service Access System
  
• ADSL2+ compliance raises downward link rate up to 24 Mbps
  
• Build-in four-port 10/100 Base-TX Ethernet switch for PC or LAN connection, supports automatic 10/100M speed-sensing and MDI/MDI-X crossover detection-and-correction
  
• RFC2684 /1483 bridged and routed PDU encapsulations over ATM over ADSL support bridging, MER, IPoA, PPPoA and PPPoE
  
• Support Networking protocols such as PPP, IP routing, NAPT, firewall, DHCP server/relay/client
  
• Interchangeable between Bridge or Router mode
  
• Supports 802.1Q tagged VLAN and 802.1p as well as standard compliant IP QoS for multiple services / triple play deployment
  
• Configuration and management via CLI/Telnet, web, SNMP or TR-069, locally or remotely
  
• Firmware upgradeable through TFTP or HTTP

X8823/X8826 is an ADSL/ADSL2+ series of customer premise equipments that provides high-speed asymmetrical data transmission on a single twisted copper pair. X8823m/X8826m has enhanced network management features, including DSL Forum TR-069 standard supported. The DSL line interface supports various ADSL standards, up to ADSL2+. At the DTE side, X8823 provides 2-port 10/100 Ethernet switch and one USB port for easy connection to user’s PC or LAN environment. With built-in IP routing, NAPT and firewall, X8823/X8826 serves as the home gateway to the Internet world. X8823/X8826 delivers broadband access for enterprises, telecommuters, home, and remote office workers with high-speed data transfer requirements.

 
Features

• Compliant with ITU-T G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3 (G.dmt.bis/ADSL2), G.992.5 (ADSL2+) and ANSI T1.413 Issue 2.
  
• Compatible and interoperable with major Central Office side ADSL DSLAM or Multi-service Access System
  
• ADSL2+ compliance raises downward link rate up to 24 Mbps
  
• Build-in four-port 10/100 Base-TX Ethernet switch for PC or LAN connection, supports automatic 10/100M speed-sensing and MDI/MDI-X crossover detection-and-correction
  
• RFC2684 /1483 bridged and routed PDU encapsulations over ATM over ADSL support bridging, MER, IPoA, PPPoA and PPPoE
  
• Support Networking protocols such as PPP, IP routing, NAPT, firewall, DHCP server/relay/client
  
• Interchangeable between Bridge or Router mode
  
• Supports 802.1Q tagged VLAN and 802.1p as well as standard compliant IP QoS for multiple services / triple play deployment
  
• Configuration and management via CLI/Telnet, web, SNMP or TR-069, locally or remotely
  
• Firmware upgradeable through TFTP or HTTP

The X9422b is an Ethernet-over-VDSL bridge that complies with various VDSL standards, and provides unprecedented broadband service over a single pair of copper wire. Four 10/100 Base-T Ethernet ports can easily connect to any PC or LAN in home or small office environments. Quality of multimedia service is ensured with its powerful traffic control and management over layer 2 or 3. While the NAT / PAT technologies share the broadband connection to all its LAN clients for all prevailing Internet applications, the embedded firewall keeps out those malicious attacks and intrusions. Network management is implemented so it can be easily configured and managed by the service provider. The X9422b delivers a compact, cost-effective, and innovative solution to its customers.

 
Features

• Compliant with ITU-T G.993.2 (VDSL2*), G.993.1 (VDSL), ANSI T1.424, ETSI TS 101 270-1 and TS 101 270-2 * Future upgrade
  
• Programmable support of plan 997, plan 998, FX plan and China plan
  
• Optional U0 band for long reach application
  
• DMT-based packet mode supports Ethernet-over-VDSL (EoVDSL) with asymmetric line data rates 100 Mbps downstream and 50 Mbps upstream, or symmetric 50 Mbps line data rates
  
• Ethernet ports have automatic speed sensing and crossover detection-and-correction capability
  
• Integrated hardware accelerated layer 2 switch with Traffic classification and QoS supports, including IEEE 802.1p and IP QoS based on TOS/DSCP
  
• IP switching, NAT, PAT, SPI firewall, packet filtering
  
• Firmware upgrade via Ethernet from local LAN or remote side
  
• Web/HTTP or SNMP for network management

X3102r is a 2-wire SHDSL CPE, which supports TC-PAM16 line code and complies with G.991.2 and G.994.1 standards. This router is equipped with an Ethernet switch with four 10/100Base-TX auto-sensing ports. X3102r SHDSL router provides a WAN port for Internet access over SHDSL, and IP sharing aand routing function via integarted Ethernet switch.

 
Features

•  High speed symmetrical data transmission on one pair of twisted copper wire
  
• PAM16 line code, complies with ITU-T G.991.2 and G.994.1 standards
  
• Provides a broad range of symmetrical multi-rate data transmissions from 72 Kbps up to 2.3 Mbps
  
• Support either Annex A or Annex B mode operation
  
• Support wetting current ranging from 0.3 mA to 3 mA
  
• One Ethernet switch with four 10/100 Mbps auto-sensing ports for PC or LAN connection
  
• RFC2684 (RFC1483) Bridged/Routed for both LLC/VC MUX
  
• Support PPPoE (RFC2516), PPPoA (RFC2364), and IPoA (RFC 2225/RFC1577) over ATM over SHDSL
  
• DHCP server supported for easy LAN IP address management
  
• Allows LAN users to access Internet through Network Address Translation (NAT, IP sharing) simultaneously
  
• Local OAM&P through command line interface via RS-232 Craft port
  
• Configuration and management by local Telnet, SNMP, and WEB Browser through the Ethernet interface, and remotely through SHDSL interface
  
• Firmware upgradeable through TFTP

X3402r SHDSL router complies with the superior four-wire SHDSL standard over two-pairs of twisted copper wire. It includes an Ethernet switch with four 10/100Base-TX Ethernet ports for LAN connection. With improved rate and reach over symmetric technologies, this reliable and cost-effective device provides an executive-class solution for both businesses and carriers. In addition to its long range of data delivery, X3402r includes IP routing and sharing support and DHCP server for easy LAN IP management. This high performance, cost effective, and easy to operate device will definitely lead your business into the next generation of communications.

 
Features

• High-speed symmetrical data transmission on two pairs of twisted copper wire
  
• PAM16 line code complies with ITU-T G.991.2 and G.994.1 standards
  
• Provides a broad range of symmetrical multi-rate data transmission from 144 Kbps up to 4.6 Mbps
  
• Support either Annex A or Annex B mode operation
  
• Support wetting current ranging from 0.3 mA to 3 mA
  
• One Ethernet switch with four 10/100Mbps auto-sensing ports for PC or LAN connection
  
• Supports RFC2684 (RFC1483) Bridged/Routed for both LLC/VC MUX
  
• Supports PPPoE (RFC2516), PPP (RFC2364), and IP (RFC 2225/RFC1577) over ATM over SHDSL
  
• DHCP server supported for easy LAN IP address management
  
• Allows LAN users to access the Internet through Network Address Translation (NAT, IP sharing) simultaneously
  
• Local OAM&P through command line interface via RS-232 Craft port
  
• Configuration and management by local Telnet, SNMP, and web browser through the Ethernet interface, and remotely through SHDSL interface
  
• Firmware upgradeable through TFTP

X3207d SHDSL DSU is a TDM mode, PAM line code based CPE designed to be interoperable with the existing and future DSLAM or Multi-service Access System in the market. Its neat structure provides Framed and Unframed E1/T1 data transmission services to fulfill customer needs within an affordable cost. X3207d supports SHDSL standardized multi-rate application, and is designed to transmit symmetrical data across a single copper pair.

 
Features

• High Speed Symmetrical Data Transmission on Single Twisted Copper Pair Wire
  
• SHDSL Line Code: PAM
  
• T1/E1 with G.703 interface provides framed or unframed transmission service
  
• High performance, simple operation, and low power consumption
  
• Compatible and interoperable with major Central Office side symmetric SHDSL DSLAM
  
• Local OAM&P via RS-232 Craft port or by telnet through auto-negotiation of 10/100BaseT port
  
• Provides loop-back function for easy maintenance

Based on the ITU-T G.991.2 G.SHDSL standard, X3208a is a single-pair High-speed Digital Subscriber Line (SHDSL) product series and provides a Frame relay and ATM inter-working transport infrastructure for Public Network WAN access, high-speed Internet access, LAN-to-LAN connectivity, and other high-speed data access applications. It is ideal for Network Service Providers who wish to deliver high-speed data transmissions to their customers. The WAN interface provides programmable symmetrical rate from 72Kbps to 2312Kbps by adapting to the DSU application. The SHDSL interface of X3208a can be configured to interoperate with SHDSL DSLAM or to fit Point-to-Point data transmission applications by flexible COE/CPE configurations. The Data interface of X3208a can be configured to connect with existing Frame relay routers.

 
Features

• High speed symmetrical data transmission on a single twisted copper pair wire
  
• SHDSL Line Code: PAM
  
• Data port with multi-protocol support V.35/RS530, X.21
  
• Provides FRF.5 Frame Relay/ATM Network Inter-working function
  
• Provides FRF.8 Frame Relay/ATM PVC Service Inter-working function
  
• Nx64Kbps rate configurable to prolong the loop reach
  
• High performance, simple operation, low power consumption
  
• Compatible and interoperable with major Central Office side symmetric DSL DSLAM
  
• Local OAM&P via RS-232 Craft port or by telnet through auto-negotiation of 10/100 BaseT port
  
• Provides loop-back function for easy maintenance

X3208d TDM mode DSU supports SHDSL standardized multi-rate symmetric application, and is designed to transmit symmetrical data service across a single copper pair at data rates from 64Kbps to 2304Kbps.

 
Features

• High speed symmetrical data transmission on a single twisted copper pair wire
  
• SHDSL Line Code: PAM
  
• Data port with multi-protocol support V.35/RS530 and optional RS449, V.11, X.21
  
• Nx64Kbps rate configurable to prolong the loop reach
  
• High performance, simple operation, and low power consumption
  
• Compatible and interoperable with major Central Office side symmetric SHDSL DSLAM
  
• Local OAM&P via RS-232 Craft port or by telnet through 10/100BaseT port
  
• Provide loop-back function for easy maintenance

The X5252-P3 is a multi-mode ADSL and VoIP-based IAD, which is designed to interoperate with DSLAMs from major vendors to meet the worldwide ADSL CPE market requirements. It complies with ANSI T1.413 issue 2, ITU-T G.dmt, G.lite, G.dmt.bis (ADSL2) and ADSL2+ with up to 24 Mbps downstream link rate. The integrated Ethernet switch features automatic crossover-correction and speed sensing for easily connecting to user’s PCs or LAN environment. Two lines of telephony service are provided using VoIP technology with SIP signaling protocol. By offering the flexibility to service provider with one model that fits different kind of ADSL applications, the X5222r-P3 delivers the convenience, efficiency and innovation of a copper wire to its customers.

 
Features

• Support up to ADSL2+ (G.992.5) with 24 Mbps downstream and 1 Mbps upstream rates
  
• Integrated four-port Ethernet switch with automatic speed-sensing and crossover correction
  
• One FXO port for failsafe lifeline, two FXS ports for VoIP using POTS phone set
  
• Support voice CODECs like G.711, G.726, etc.; programmable G.168 echo cancellation, adaptive jitter buffer and packet loss concealment
  
• Voice activity detection (VAD), comfort noise generation (CNG) and caller ID
  
• DTMF tone detection and generation; Fax /Modem detection and pass-through
  
• Support SIP signaling protocol and bonus services like call forwarding, call waiting, call transfer, call busy, call return, enquiry service, CLIP/CLIR and three way conference
  
• Support Networking protocols such as PPP, NAT, Routing, DHCP server/relay/client
  
• Configuration and management by Web-browser through the Ethernet interface and remotely through ADSL interface
  
• Firmware upgradeable through HTTP/TFTP

The X5258-P3 is a multi-mode ADSL and VoIP-based IAD, which is designed to interoperate with DSLAMs from major vendors to meet the worldwide ADSL CPE market requirements. It complies with ANSI T1.413 issue 2, ITU-T G.dmt, G.lite, G.dmt.bis (ADSL2) and ADSL2+ with up to 24 Mbps downstream link rate. The integrated Ethernet switch features automatic crossover-correction and speed sensing for easily connecting to user’s PCs or LAN environment. Alternatively the built-in 802.11g WLAN brings relief to those troublesome wirings. Two lines of telephony service are provided using VoIP technology with SIP signaling protocol. By offering the flexibility to service provider with one model that fits different kind of ADSL applications, the X5258-P3 delivers the convenience, efficiency and innovation of a copper wire to its customers.

 
Features

• Support up to ADSL2+ (G.992.5) with 24 Mbps downstream and 1 Mbps upstream rates
  
• Integrated four-port Ethernet switch with automatic speed-sensing and crossover correction
  
• 802.11b/g WLAN supports up to 54 Mbps transmission rate
  
• Secure transmitting encryption by either WEP (64, 128 or 256 bits key), TKIP or WPA
  
• Authentication by PSK (Pre-Shared Key) or 802.1x / RADIUS
  
• One FXO port for failsafe lifeline, two FXS ports for VoIP using POTS phone set
  
• Support voice CODECs like G.711, G.726, etc.; programmable G.168 echo cancellation, adaptive jitter buffer and packet loss concealment
  
• Voice activity detection (VAD), comfort noise generation (CNG) and caller ID
  
• DTMF tone detection and generation; Fax /Modem detection and pass-through
  
• Support SIP signaling protocol and bonus services like call forwarding, call waiting, call transfer, call busy, call return, enquiry service, CLIP/CLIR and three way conference
  
• Support Networking protocols such as PPP, NAT, Routing, DHCP server/relay/client
  
• Configuration and management by Web-browser through the Ethernet interface and remotely through ADSL interface
  
• Firmware upgradeable through HTTP/TFTP

The X5322r-P3 is a multi-mode ADSL and VoIP-based IAD, which is designed to interoperate with DSLAMs from major vendors to meet the worldwide ADSL CPE market requirements. It complies with ANSI T1.413 issue 2, ITU-T G.dmt, G.lite, G.dmt.bis (ADSL2) and ADSL2+ with up to 24 Mbps downstream link rate. The integrated Ethernet switch features automatic crossover-correction and speed sensing for easily connecting user’s PCs or LAN environment. Two lines of telephony service are provided using Voice over IP technology compatible with either SIP or MGCP call server/agent products. With embedded firewall and IP sharing technology this IAD delivers secure broadband Internet access to be shared by all connected clients. Featuring Per-port PVC / 802.1p / IP DiffServ functions, quality of service (QoS) can be easily achieved for real-time multimedia services. By offering the flexibility to service provider with one model that fits different kind of ADSL applications, the X5322r-P3 offers convenience, efficiency and innovation of copper wire to its customers.

 
Features

• ADSL WAN interface supports up to ADSL2+ with 24 Mbps downstream rate
  
• The integrated 4-port Ethernet switch supports automatic 10/100M speed-sensing and MDI/MDI-X crossover detection-and-correction
  
• Two FXS ports for telephone sets and one FXO port for PSTN/PABX as failsafe lifeline
  
• Support voice CODECs like G.711 (A– and μ–law), G.726 and etc.; G.168 echo cancellation, adaptive jitter buffer and dynamic packet loss compensation
  
• Voice activity detection (VAD), comfort noise generation (CNG) and caller ID
  
• DTMF tone detection and generation; Modem and Fax detection and pass-through
  
• Support SIP and MGCP voice signaling protocols, with various call features like Call Hold, Call Waiting, Call Transfer, Call Last Unanswered, Speed Dial, Last Number Redial, Three-way Conference Call and more with future release (SIP 3-way call, call forwarding, call redirection and etc.)
  
• Support Networking protocols such as PPP, NAT, Routing, DHCP server/relay/client
  
• Support local and remote management through Web/HTTP, CLI/Telnet or SNMP
  
• Simple firmware upgrade via TFTP, FTP or HTTP

The X5368r-P3 is a multi-mode ADSL and VoIP-based wireless IAD, which is designed to interoperate with DSLAMs from major vendors to meet the worldwide ADSL CPE market requirements. It complies with ANSI T1.413 issue 2, ITU-T G.dmt, G.lite, G.dmt.bis (ADSL2) and ADSL2+ with up to 24 Mbps downstream link rate. The integrated Ethernet switch features automatic crossover-correction and speed sensing for easily connecting user’s PCs or LAN environment. Alternatively the built-in 802.11g WLAN brings relief to those troublesome wirings. Two lines of telephony service are provided using Voice over IP technology compatible with either SIP or MGCP call server/agent products. With embedded firewall and IP sharing technology this IAD delivers secure broadband Internet access to be shared by all connected clients. Featuring Per-port PVC / 802.1p / IP DiffServ functions, quality of service (QoS) can be easily achieved for real-time multimedia services. By offering the flexibility to service provider with one model that fits different kind of ADSL applications, the X5368r-P3 offers the convenience, efficiency and innovation of copper wire to its customers.

 
Features

• ADSL WAN interface supports up to ADSL2+ with 24 Mbps downstream rate
  
• The integrated 4-port Ethernet switch supports automatic 10/100M speed-sensing and MDI/MDI-X crossover detection-and-correction
  
• 802.11b/g WLAN supports up to 54 Mbps transmission rate
  
• Secure transmitting encryption by either WEP (64 or 128 bits key), TKIP or WPA
  
• Authentication by PSK (Pre-Shared Key) or 802.1x / RADIUS
  
• Two FXS ports for telephone sets and one FXO port for PSTN/PABX as failsafe lifeline
  
• Support voice CODECs like G.711 (A– and μ–law), G.726 and etc.; G.168 echo cancellation, adaptive jitter buffer and dynamic packet loss compensation
  
• Voice activity detection (VAD), comfort noise generation (CNG) and caller ID
  
• DTMF tone detection and generation; Modem and Fax detection and pass-through
  
• Support SIP and MGCP voice signaling protocols, with various call features like Call Hold, Call Waiting, Call Transfer, Call Last Unanswered, Speed Dial, Last Number Redial, Three-way Conference Call and more with future release (SIP 3-way call, call forwarding, call redirection and etc.)
  
• Support Networking protocols such as PPP, NAT, Routing, DHCP server/relay/client
  
• Support local and remote management through Web/HTTP, CLI/Telnet or SNMP
  
• Simple firmware upgrade via TFTP, FTP or HTTP

 The X5669-WP3U is a multi-mode ADSL and VoIP-based IAD, which is designed to interoperate with DSLAMs from major vendors to meet the worldwide ADSL CPE market requirements. It complies with G.994, G.992.1 (G.dmt), G.992.2 (G.lite), ANSI T1.413, G.992.3 (ADSL2), G.992.5 (ADSL2+), I.432 ATM with up to 24 Mbps downstream link rate. The integrated Ethernet switch features automatic crossover-correction and speed sensing for easily connecting to user’s PCs or LAN environment. Alternatively the built-in 802.11g WLAN brings relief to those troublesome wirings. Two lines of telephony service are provided using VoIP technology with SIP and MGCP signaling protocol. By offering the flexibility to service provider with one model that fits different kind of ADSL applications, the X5669-WP3U delivers the convenience, efficiency and innovation of a copper wire to its customers.

 
Features

• Support up to ADSL2+ (G.992.5) with 24 Mbps downstream and 1 Mbps upstream rates
  
• Integrated four-port Ethernet switch with automatic speed-sensing and crossover correction
  
• 802.11b/g WLAN supports up to 54 Mbps transmission rate
  
• Secure transmitting encryption by either 802.1x; WEP; WEP2; WPA; WPA2; TKIP; AES; 802.11i
  
• One FXO port for failsafe lifeline, two FXS ports for VoIP using POTS phone set
  
• Support voice CODECs like G.711, G.726, G.729AB, BV16, ILBC, T.38 etc.; programmable G.168 echo cancellation, adaptive jitter buffer and packet loss concealment
  
• Voice activity detection (VAD), comfort noise generation (CNG) and caller ID
  
• DTMF tone detection and generation; Fax / Modem detection and pass-through
  
• Support SIP signaling protocol and bonus services like call forwarding, call waiting, call transfer, call busy, call return, enquiry service, CLIP/CLIR and three way conference
  
• Support Networking protocols such as PPP, NAT, Routing, DHCP server / relay / client
  
• Configuration and management by Web-browser through the Ethernet interface and remotely through ADSL interface
  
• Firmware upgradeable through HTTP

 XG6546p2 is a state-of-the-art new Wireless Gateway with the latest advanced broadband wireless connectivity technology. Applying with 802.11g technology, it features high speed and transfer rates can up to 108Mbps, compatible with 802.11b. Also, with a built-in 4 port 10/100 Base-TX switch, it is effortless to build a LAN and share Internet access via wire line and wireless. It supports standard 802.11g mode, transfer rates can be up to 108Mbps. XG6546p2 features the integrated NAT technologies, including enhanced much higher level of security and firewall protection to shield your internal network and stop intruder and hackers from accessing your network. XG6546p2 flexible design lets it work with a variety of platforms, PC/Mac, and with different operation systems. It can also be connected with FTTH devices, cable modems or any one of the XAVi xDSL series modems/routers to obtain broadband Internet service. Web-based user interface facilitates the management and easy way to share files, resources and access with other LAN users. XG6546p2 supports two POTS ports for user to make VOIP call. SIP protocol will be supported at first to save user more money via Internet.

 
Features

• Supports PPPoE, PPP, PPTP Client, ARP, DHCP Client and Server, TCP/IP, UDP, ICMP, DNS Proxy, Dynamic DNS, SNTP features
  
• Four 10/100M Base TX ports for PC or LAN connection and one10/100M Base TX WAN port for broadband connection
  
• 802.11g wireless access point supports up to 108Mbps
  
• Speeds up the gaming and multimedia connections dramatically
  
• Supports automatic hacker pattern detection to block malicious intrusion of local networks
  
• Network Address Translation (NAT) conceals private network from outside view while VPN pass through allows secure communication between offices
  
• Provides web-based user interface eases the installation, configuration and management
  
• Virtual server feature, outside users will be able to access the internal servers via Internet
  
• Administrators can block specific interior users' Internet access by UPI (User Profile Identification)
  
• Supports UPnP for easy device discovery
  
• Allows LAN users to access Internet through Network Address Translation (NAT, IP sharing) simultaneously
  
• SIP
  
• Two FXS ports
  
• Dedicated DSP processor for codec
  
• Bonus services
  
• Provisioning

XG6545p2 is a state-of-the-art new router with the latest advanced broadband connectivity technology. With a built-in 4 port 10/100 Base-TX switch, it is effortless to build a LAN and share Internet access. XG6545p2 features the integrated NAT technologies, including enhanced much higher level of security and firewall protection to shield your internal network and stop intruder and hackers from accessing your network. XG6545p2 flexible design lets it work with a variety of platforms, PC/Mac, and with different operation systems. It can also be connected with FTTH devices, cable modems or any one of the XAVi xDSL series modems/routers to obtain broadband Internet service. Web-based user interface facilitates the management and easy way to share files, resources and access with other LAN users. XG6545p2 supports two POTS ports for user to make VOIP call. SIP protocol will be supported at first to save user more money via Internet.

 
Features

• Supports PPPoE, PPP, PPTP Client, ARP, DHCP Client and Server, TCP/IP, UDP, ICMP, DNS Proxy, Dynamic DNS, SNTP features
  
• Four 10/100M Base TX ports for PC or LAN connection and one10/100M Base TX WAN port for broadband connection
  
• Speeds up the gaming and multimedia connections dramatically
  
• Supports automatic hacker pattern detection to block malicious intrusion of local networks
  
• Network Address Translation (NAT) conceals private network from outside view while VPN pass through allows secure communication between offices
  
• Provides web-based user interface eases the installation, configuration and management
  
• Virtual server feature, outside users will be able to access the internal servers via Internet
  
• Administrators can block specific interior users' Internet access by UPI (User Profile Identification)
  
• Supports UPnP for easy device discovery
  
• Allows LAN users to access Internet through Network Address Translation (NAT, IP sharing) simultaneously
  
• SIP
  
• Two FXS ports
  
• Dedicated DSP processor for codec
  
• Bonus services
  
• Provisioning

XG6525p2 supports two voice ports for user to make VOIP call. SIP protocol will be supported to save user more money via Internet. Based on industry standard, Session Initiation Protocol (SIP, RFC-3261), XG-6544p2 provides user a simple way to use IP-based voice communication. Plug it into your home router and connect existing phones or fax machines. With Internet telephone service provider, you will get clear telephone reception and reliable fax connections.

 
Features

• SIP
  
• Two FXS ports
  
• Dedicated DSP processor for codec
  
• One 10/100 Base-T Ethernet
  
• G.711, G.723, G729
  
• Echo cancellation
  
• Voice activity detection
  
• Easy used Web configure user interface
  
• Software upgrade by Web configure user interface
  
• DTMF detection & generation
  
• FSK generation

XG6745 is a product to provide Triple Play one box to support QoS and VLAN. It is used for Telco to deploy vedio and voice application with cost effective CPE. XG6745 features the Layer2 and Layer3 QoS technologies, including the detection of DSCP/TOS and VLAN p-bits and generate specific Q-tag for different application or specific ports base. XG6745 built-in a manageable switch includes 4 hardware queues to handle different priority packets upstream or downstream. This can be used to differentiate different application. For example, video packets should be sent with most high priority and bandwidth guarantee. With the box, it is very easy for user to connect Set-top-box with specific port to provide a reliable video connection. XG6745 flexible design lets it work with a variety of platforms, PC/MAC, and with different operation systems. It can also be connected with FTTH devices, cable modems or any one of the XAVi xDSL series modems/routers to obtain broadband Internet service. Web-based user interface facilitates the management and easy way to share files, resources and access with other LAN users.

 
Features

• Four 10/100M Base TX ports for PC or LAN connection and one10/100M Base TX WAN port for broadband connection
  
• Speeds up the gaming and multimedia connections dramatically
  
• Provides web-based user interface eases the installation, configuration and management
  
• Provisioning
  
• deliver 100Mbps throughput on each port
  
• support VLANs
  
• support 4 priority queues in the upstream direction using strict priority.
  
• WAN and LAN support 802.1Q/1p
  
• TR-069 will be supported

XAViwave XW501B, a 54 Mbps Wireless LAN USB 2.0 Adapter brings blazing fast connection to either your desktop or notebook PC. With its advanced 2.4GHz 802.11g digital radio transmission and embedded antenna technologies, immediately you are free from the bothering cable wiring and troublesome adjusting of the external antenna. Even more, your wireless transmission can be secured by selective WEP, TKIP, AES or WPA encryption without sacrificing performance. A savvy wizard helps to make software installation quick and simple. Its USB 2.0 interface brings plug-and-play capability to achieve on-demand connection. Simply plugs it into the USB port of your PC and start enjoying its convenience. The XW501B supports roaming so you can move your notebook PC without losing connection, within the coverage area. Compliance to the 802.11g standard makes sure it works with existing 802.11b and 802.11g networks. Now with this compact sized and portable WLAN adapter, user can easily share the Internet access or enjoy the network resources with real mobility at home, office or any public hotspot.

 
Features

• IEEE 802.11g（2.4 GHz）DSSS high rate compatible; backward compatible with 802.11b standard
  
• High speed wireless connection, up to 54 Mbps
  
• Auto fallback data rate under noisy environment
  
• High sensitivity and output power
  
• 64-bit, 128-bit and 256-bit Wired Equivalent Privacy (WEP) encryption
  
• AES-CCMP
  
• Wi-Fi Protected Access (WPA) encryption
  
• 802.1x authentication
  
• USB 2.0 High-speed (480 Mbps) interface and backward compatible with USB 1.1